EA454 – Car Horn Wiring Harness
Vast of automatic machines are lunched to ensure stable quality as well as cost performance products.
EA454 – Car Horn Wiring Harness
Features
Damage-free modified wiring harness
12V/24V horn relay wiring harness
Temperature: -40℃~+125℃
Simultaneous development and customization according to customer requirements.
Typical Application
- The original car is a horn that can be converted into pairs.
- The original car lines have a certain degree of aging,
The installation of this wiring harness is equivalent to adding a well-connected circuit to the original car, which not only protects the original car line but also protects the original car.
Also increases the loudness of the speakers.
Precautions:
- The normal working voltage of the speaker is 9-16V.
- If the horn does not sound or the sound is small due to the aging of the original car line (the voltage drop is too large), the horn-modified wiring harness produced by our company can be installed.
- The horn should be installed away from the engine.
- When installing, the bell mouth should be inclined downward at 45°, so as to prevent the water from coming out.
- When honking the horn, do not hold down for a long time, generally not more than 30 seconds.
- If the horn works unstable, the following inspections can be carried out:
(a: Whether the copper terminals are loose or fall off)
(b: Whether the battery power is sufficient)
(c: Whether the speaker cable is too thin)
(d: Whether the horn button is damaged)
Share EA454 – Car Horn Wiring Harness with Your Clients
Facebook
Twitter
LinkedIn
Telegram
WhatsApp
